|
Water Dry Out and Mold Prevention
Services...
"It ain't braggin' if you can do it!"
Mold grows or colonizes only if moisture is present. Water
intrusion must be stopped before mold remediation takes place. Mold Pro can
prevent mold from growing with our innovative approach using heat,
dehumidification and EPA registered products.
All the competition does is rip out your baseboards, punch holes in your
drywall, turn on blowers and dehumidifiers, and tell you they'll be back in
four days.
That is unacceptable!
Mold Pro uses air circulation and dehumidification, but we use what the others
just do not have: THERMAL REMEDIATION AND MOLD PREVENTION PRODUCTS!
We will heat the area to 100 degrees F, using our specially designed 180,000btu
portable heaters, we will set up blowers and a 750cfm dehumidifier and bring
surface below 15% moisture content, and the air below 50% relative humidity. We
will also apply mold prevention products, and this will all be done at a better
cost as the competitors!
Consider the pricing breakdown.
Our Competitors' Costs:
- Two Men to set-up - $ 70/hr. = $ 280
- Two Blowers - $ 50/day = $ 200
- Two Dehumidifiers - $ 90/day = $ 720
- Two Men take-down $ 70/hr. = $ 70
Four-Day Total w/ no mold prevention= $ 1270
MOLD PRO Costs:
- Two Men to set-up
- Two Blowers
- 750cfm Dehumidifier
- THM 180 Heater
- Application of Mold Prevention Products
- Two Men take-down
48-Hour Dryout time including mold-prevention
products= $1250
We Dry Out better, faster, and we cost less!
And after all, who better for Dry Outs and mold prevention than MOLD
PRO?
|
|
|
